Panasonic AJ-YA120AG manual BLK Clip, CC F1 Blank, CC F2 Blank, Edh Sd, ESR Mode SD, CCR Mode SD

Setup menus

VIDEO

	Item		Setting
							Description of settings
No.	Superimposed	No.	Superimposed
	display		display
628	U/C ENH H			For enhancing the horizontal outlines during up-conversion.
		0000	0dB	0: 0dB
		0001	+1dB	1: +1dB
629	U/C ENH V			For enhancing the vertical outlines during up-conversion.
		0000	0dB	0: 0dB
		0001	+1dB	1: +1dB
630	1080i>HD_OUT			For selecting the HD output signal format during 1080i tape playback or in the
				1080i EE mode.
		0000	1080i	0:	1080i
		0001	720p	1:	720p
				<Notes>
				O This item’s setting cannot be changed while a tape is being recorded or while
					the recording pause mode is established.
				O When 720p is selected as this item’s setting, no signals are output from the DV
					connector. If “1394” is selected as the menu item No.600 [VIDEO IN SEL]
					setting, “HDSDI” is established as the VIDEO IN SEL setting.
632	720p>HD_OUT			For selecting the HD output signal format during 720p tape playback or in the 720p
				EE mode.
		0000	1080i	0:	1080i
		0001	720p	1:	720p
				<Notes>
				O This item’s setting cannot be changed while a tape is being recorded or while
					the recording pause mode is established.
				O When 1080i is selected as this item’s setting, no signals are output from the DV
					connector. If “1394” is selected as the menu item No.600 [VIDEO IN SEL]
					setting, “HDSDI” is established as the VIDEO IN SEL setting.
634	480p>HD_OUT			For selecting the HD output signal format during 480p tape (DVCPRO50P)
				playback.
		0000	1080i	0:	1080i
		0001	720p	1:	720p
636	480i>HD_OUT			For selecting the HD output signal format during 480i tape (DVCPRO50, DVCPRO,
				DV or DVCAM) playback.
		0000	1080i	0:	1080i
		0001	720p	1:	720p
676	BLK CLIP			For setting whether to clip what is below the pedestal level for the Y (luminance)
				signal of VIDEO OUT and SD OUT.
		0000	OFF	0: What is below the pedestal level is not clipped.
		0001	ON	1: What is below the pedestal level is clipped.
680	CC (F1) BLANK			For selecting ON or OFF for the closed caption signal in the first field.
	2DW	0000	BLANK	0: Forced blanking
		0001	THRU	1: No blanking
681	CC (F2) BLANK			For selecting ON or OFF for the closed caption signal in the second field.
	2DW	0000	BLANK	0: Forced blanking
		0001	THRU	1: No blanking
684	EDH (SD)			For setting whether to superimpose EDH onto the SD SDI output.
	2DW	0000	OFF	0: EDH is not superimposed.
		0001	ON	1: EDH is superimposed.
685	ESR MODE (SD)			For selecting the mode of the edge subcarrier reduction (ESR) operation in the
	2DW			playback circuit.
		0000	OFF	0: ESR is forcibly turned off.
		0001	AUTO	1: ESR is automatically set to ON or OFF depending on the unit’s operation.
686	CCR MODE (SD)			For selecting the cross color processing during playback.
	2DW	0000	OFF	0: The cross color is output as is.
		0001	AUTO	1: The cross color can be reduced.
<Note>						“	” indicates the factory setting.
2DW: With SD output (SD tape playback or down-converted output)

44