LG Electronics 47WV50MS Setting Description Factory Reset, Set ID, Tile Mode, Auto Config

ENGLISH

48CUSTOMIZING SETTINGS

Setting		Description
Factory Reset	Select this option to return to the default factory settings.
Set ID	You can assign a unique Set ID NO (name assignment) to each product when several products
	are connected for display. Specify the number (1 to 255) using the button and exit. Use the
	assigned Set ID to individually control each product using the Product Control Program.
Tile Mode	Tile Mode	To use this function
		- Must be displayed with various other products.
		- Select Tile Mode, set rows and columns, and then enter the tile ID to set the
		location.
		- Tile Mode: row x column (row = 1-15, column = 1-15).
		- 15 x 15 available.
	Auto Config.	Sets to adjust the screen position, clock, and phase automatically.
		The displayed image may be unstable for a few seconds while the
		configuration is in progress.
	Position	Moving the screen position horizontally and vertically.
	Size	Adjust the horizontal and vertical size of the screen taking into account the size
		of the bezel.
	Natural	The image is omitted by the distance between the screens to be naturally
		shown.
	Reset	Function to initialize and release Tile.
		All Tile setting are released when selecting Tile recall and the screen returns to
		Full screen.
PIP/PBP	Displays videos or photos stored in the USB device on a single monitor by dividing it into the main
	and sub screens.
	Option
	Mode	Sets the type of secondary screen.
		*OFF: Disables the secondary screen.
		*PIP (Picture In Picture): Displays the secondary screen in the main screen.
		*PBP (Picture By Picture): Displays the secondary screen next to the main
		screen.
	Position	Adjusts the position of the sub screen (top left, bottom left, top right, bottom
		right)
		The default value is the bottom right.
	Size	Adjusts the size of the sub screen (Size 0 to 10).
		The default size of PIP (Size: 0) is 480x270; the maximum size 10 is 960x540.

NOTE

yyThe Position and Size options are enabled only in PIP mode.

NOTE

yyIf the interior temperature of the set exceeds 80°C, the set will be turned off automatically for safety reasons.