47
ENG
ENGLISH
CUSTOMIZING SETTINGS
Setting Description
Language To choose the language in which the control names are displayed.
ISM Method A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods
could result in a ghost image remaining even when you change the image. Avoid allowing a fixed
image to remain on the screen for a long period of time.
Setting
Normal Leave on normal if you don't foresee image burn in being a problem.
Orbiter May help prevent ghost im ages. How ever, it is best not to allow any f ixed
image to remain on the screen. To avoid a permanent image on the screen,
the screen will move every 2 minutes.
Inversion This funct ion invert s t he p anel colo r of the sc reen. The pane l c olor is
automatically inverted every 30 minutes.
White Wash White wash fills the screen with solid white. This helps removes permanent
images burned into the screen. A permanent image may be impossible to clear
entirely with white wash.
DPM Select A user can choose to turn the power saving mode on / off.
Fail Over If there is no input signal, it automatically switches to another input with signal.
Setting
Off Stops auto switch of the input source.
Auto Attempts to find another input source having video signal according to the
defined input order if no video signal comes from the current input source.
(Refer to the sequence of the table below.)
Current
Input Source Attempt 1 Attempt 2 Attempt 3 Attempt 4
RGB HDMI DVI DP If there is no
available video
signal to switch to,
then the current
input source
remains.
DVI HDMI DP RGB
HDMI DVI DP RGB
DP HDMI DVI RGB
Manual The input source changes according to the specified order.
If there is no video signal from the specified input source, then the current
input source remains.
OPTION Settings
1 Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to OPTION and press

OK.

3 Press the navigation buttons to scroll to the setting or option

you want and press OK.

- To return to the previous level, press BACK.
4 When you are finished, press EXIT.

When you return to the previous menu, press BACK.

The available option settings are described in the following:

Move OK
OPTION
ꔋ
• Language
• ISM Method : Normal
• DPM Select : On
• Fail Over : Off
• Factory Reset
• Set ID : 1
• Tile Mode
• PIP/PBP
• Fan
• USB Content Recovery : Off
• Product/Service Info.
NOTE
yYou can set Energy Saving to Off or set the length of time before entering Energy Saving
mode to 5 sec./10 sec./15 sec./1 min./3 min./5 min./10 min.
yIt makes a little difference according to your environment.
yIt may not be supported depending on the model.