17
ENG
ENGLISH
USING THE MONITOR SET
USING THE MONITOR SET

Connecting to a PC

Your Monitor set supports the Plug & Play* feature.
* Plug & Play: A PC will have a built-in driver for
the monitor, no extra software is needed.
yConnect the signal
input cable and tighten
it by turning the screws
clockwise.

RGB Connection

Transmits the analog video signal from your PC to
the monitor set. Connect the PC and the Monitor
set with the 15-pin signal cable as shown the
following illustrations.
Select RGB input.
NOTE
yIt is recommended to use the monitor set
with the HDMI connection for the best image
quality.
yTo comply with the specifications of the
product, use a shielded interface cable with
ferrite core, such as a D-sub 15-pin cable
and DVI/HDMI cable.
yIf you turn the monitor set on when the set
becomes cold, the screen may flicker. This
is normal.
ySome red, green, or blue spots may appear
on the screen. This is normal.
yDo not press the screen with your finger for
a long time as this may result in temporary
distortion on the screen.
yAvoid displaying a fixed image on the
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
CAUTION
y Use the standard Macintosh
adapter since an incompatible
adapter is available in the
market. (Different signaling
system)
yApple computers ma y require an adapter to
connect to this monitor. Call or visit their web
site for more information.
NOTE
AUDIO
IN
REMOTE
CONTROL IN
IN/DVI DP
RGB
/COMPONENT OUT
RGB
/COMPONENT IN
AUDIO
IN
REMOTE
CONTROL IN
DVI IN
AUDIO
IN
REMOTE
CONTROL IN
PC
Back of the product.
Macintosh Adapter
(not included)
(not included)
PC/MAC
(not
included)