2.4GHz 150Mbps Outdoor Wireless Access Point User Guide
be changed.
Type - Choosing dynamic IP to get IP address from DHCP server, or choosing static IP to configure IP address manually.
IP Address - Enter the IP address of your router in
Subnet Mask - An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask.
Gateway - The gateway should be in the same subnet as your IP address.
Note:
1)If you change the IP Address of LAN, you must use the new IP Address to login the Router.
2)If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP server will not take effect until they are
3)If the new LAN IP Address you set is not in the same subnet, the Virtual Server and DMZ Host will change accordingly at the same time.
4)The device will reboot automatically after you click the Save button.
4.7Wireless
The Wireless option, improving functionality and performance for wireless network, can help you to make the AP an ideal solution for your wireless network.
Here you can create a wireless local area network just through a few settings. Basic Settings is used for the configuration of some basic parameters of the AP. Wireless Mode allows you to select the mode that AP works on. Security Settings provides three different security types to secure your data and thus provide greater security for your wireless network. MAC filtering allows you to control the access of wireless stations to the AP. Wireless Statistics shows you the statistics of current connected Wireless stations. Distance Setting is used to adjust the wireless range in outdoor conditions. Antenna Alignment shows how remote AP's signal strength changes while changing the antenna's direction. Throughput Monitor helps to watch wireless throughput information Wireless statistics enables you to get detailed information about the current connected wireless stations.
There are eight submenus under the Wireless menu (shown in Figure
Figure 4-6 Wireless menu
44
