2.4GHz 150Mbps Outdoor Wireless Access Point User Guide
Figure 5-9 PPPoE Advanced Settings
MTU Size - The default MTU (Maximum Transmission Unit) size is 1480 bytes, which is usually fine. For some ISPs, you need modify the MTU. This should not be done unless you are sure it is necessary for your ISP.
Service Name/AC Name - They should not be done unless you are sure it is necessary for your ISP.
ISP Specified IP Address - If you know that your ISP does not automatically transmit IP address to the Device during login, click "Use the IP Address specified by ISP" checkbutton and enter the IP address in
Detect Online Interval - The default value is 0. You can input the value between 0 and 120. The Device will detect Access Concentrator online every interval seconds. If the value is 0, it means not detecting.
Use the following DNS Servers - If your ISP specifies a DNS server IP address for you, click the checkbox, and fill the Primary DNS and Secondary DNS blanks below. The Secondary DNS is optional. Otherwise, the DNS servers will be assigned dynamically from ISP.
Primary DNS - (Optional) Enter the DNS IP address in
Secondary DNS - (Optional) Enter another DNS IP address in
Note:
The new advanced PPPoE parameters will not take effect until you
Click the Back button when finished.
4.If your ISP provides BigPond Cable (or Heart Beat Signal) connection, please select BigPond Cable option. And then you should enter the following parameters as in Figure
76
