TP-Link TL-WA7210N manual Network, 5.6.1 WAN, I. Enter the client device’s PIN on the Router

TL-WA7210N2.4GHz 150Mbps Outdoor Wireless Access Point User Guide

I.Enter the client device’s PIN on the Router

Use this method if your client device has a Wi-Fi Protected Setup PIN number.

Step 1: Keep the default Status as Enabled and click the Add Device button in 错误！未找到 引用源。, then the following screen will appear.

Figure 5-4 Add A New Device

Step 2: Enter the PIN number from the client device in the field on the above WPS screen. Then click Connect button.

Step 3: “Connect successfully” will appear on the screen of Figure 5-4,which means the client device has successfully connected to the Router.

II. Enter the Router’s PIN on your client device

Use this method if your client device asks for the Router’s PIN number.

Step 1: On the client device, enter the PIN number listed on the Router’s Wi-Fi Protected Setup screen. (It is also labeled on the bottom of the Router.)

Step 2: The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup process.

Step 3: When the WPS LED is on, the client device has successfully connected to the Router.

Step 4: Refer back to your client device or its documentation for further instructions.

5.6Network

The Network option allows you to customize your local network manually by changing the default settings of the AP.

There are three submenus under the Network menu (shown in Figure 5-5):LAN, WAN and MAC Clone. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below.

Figure 5-5 the Network menu

5.6.1WAN

Choose menu Network > WAN, and then you can configure the IP parameters of the WAN on the screen below. There are six WAN connection types: Dynamic IP, Static IP, PPPoE/Russia PPPoE, BigPond Cable, L2TP/Russia L2TP, and PPTP/Russia PPTP; while there is one more type in AP Router mode, BigPond Cable.

1.If your ISP is running a DHCP server, select the Dynamic IP option. Then the Device will automatically get IP parameters from your ISP. You can see the page as follow (Figure 5-6).

72