TP-Link TL-WA7210N manual Wps

TL-WA7210N

2.4GHz 150Mbps Outdoor Wireless Access Point User Guide

AP Router - In this mode, the device enables multi-users to share Internet via ADSL/Cable Modem. The wireless port share the same IP to ISP through Ethernet WAN port. The Wireless port acts the same as a LAN port while at AP Router mode.

Access Point - In this mode, the device can be connected to a wired network and transform the wired access into wireless that multiple devices can share together, especially for a home, office or hotel where only wired network is available.

Multi-SSID - In this mode, the device can create up to 4 wireless networks labeled with different SSIDs and assign each SSID with different security or VLAN, especially for the situation when the various access policies and functions are required.

Repeater(Range Extender) - In this mode, the device can copy and reinforce the existing wireless signal to extend the coverage of the signal, especially for a large space to eliminate signal-blind corners.

Bridge with AP - In this mode, the device can be used to combine multiple local networks together to the same one via wireless connections, especially for a home or office where separated networks can't be connected easily together with a cable.

Client - In this mode, the device can be connected to another device via Ethernet port and act as an adaptor to grant your wired devices access to a wireless network, especially for a Smart TV, Media Player, or game console only with an Ethernet port.

Note:

When you change the operation mode to Client/Repeater, WPS function will stay disabled. Please manually enable this function if needed when you switch back to Access Point/Multi-SSID/Bridge mode.

4.5WPS

Choose WPS in the main menu, you will see the page as shown in Figure 4-3.The WPS function is disabled and cannot be configured in the standard AP mode.

Figure 4-3 WPS

Selected SSID - If Multi-SSID is enabled, you can choose one of the SSIDs from the pull-down list.

42