TP-Link TL-WA7210N manual Advanced Security

TL-WA7210N

2.4GHz 150Mbps Outdoor Wireless Access Point User Guide

TFTP ALG - To allow TFTP clients and servers to transfer data across NAT, click Enable.

H323 ALG - To allow Microsoft NetMeeting clients to communicate across NAT, click Enable.

Click the Save button to save your settings.

5.10.2Advanced Security

Choose menu Security > Advanced Security, and then you can protect the Device from being attacked by ICMP-Flood, UDP Flood and TCP-SYN Flood in the screen as shown in Figure 5-42.

Figure 5-42 Advanced Security

Note:

FLOOD Filtering will take effect only when the Traffic Statistics in System Tools is enabled.

Packets Statistics interval (5~60) - The default value is 10. Select a value between 5 and 60 seconds in the pull-down list. The Packets Statistic interval value indicates the time section of the packets statistic. The result of the statistic used for analysis by ICMP-Flood, UDP Flood and TCP-SYN Flood.

DoS Protection - Enable or Disable the DoS protection function. Only when it is enabled, will the flood filters be enabled.

Enable ICMP-FLOOD Attack Filtering - Enable or Disable the ICMP-FLOOD Attack Filtering.

ICMP-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value between 5 ~ 3600. When the current ICMP-FLOOD Packets number is beyond the set value, the Device will start up the blocking function immediately.

103