TP-Link TL-WA7210N manual The IP parameters should have been provided by your ISP,  Note

TL-WA7210N

2.4GHz 150Mbps Outdoor Wireless Access Point User Guide

Note:

It is strongly recommended to restart the Cable Modem after the Quick Setup is done. This important operation will solve most issues.

2)Choose to clone MAC address or not, if you are unsure, please select YES. Then click Next, and you will come to the page shown in Figure 3-18.

Static IP - In this type, you should manually fill in the IP address, Subnet Mask, Default Gateway, and DNS IP address, which are specified by your ISP.

1)If you choose Static IP in Figure 3-16and then click Next, Figure 3-20will appear.

Figure 3-20 Static IP

IP Address- This is WAN IP address as seen by external users on the Internet (including your ISP). Enter the IP address in the field.

Subnet Mask- It is used for the WAN IP address, which is usually 255.255.255.0.

Default Gateway- Enter the default gateway in the blank if required.

Primary DNS- Enter the DNS IP address in the blank if required.

Secondary DNS- If your ISP provides another DNS IP address, enter it in this field.

Note:

The IP parameters should have been provided by your ISP.

After you have entered the above necessary parameters and then click Next, Figure 3-18will then appear.

2.When you finish the wireless setting in Figure 3-18and click Next, then Figure 3-21will appear, where you can click Finish button to complete the Quick Setup.

22