TP-Link TL-WA7210N manual Wireless settings in AP Client Router mode

TL-WA7210N2.4GHz 150Mbps Outdoor Wireless Access Point User Guide

2. Wireless settings in AP Client Router mode

Figure 5-17 Wireless Settings in AP Client Router mode

Wireless Name of WISP Station - The SSID of the AP your Device is going to connect to as a client. You can also use the search function to select a SSID to join.

MAC Address of WISP Station - The BSSID of the AP your Device is going to connect to as a client. You can also use the search function to select a BSSID to join.

Survey - Click this button, you can search the AP which runs in the current channel.

Key type - This option should be chosen according to the AP's security configuration. It is recommended that the security type is the same as your AP's security type.

Auth Type - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX). It indicates the authorization type of the Root AP.

WEP Index - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX). It indicates the index of the WEP key.

Password - If the AP your Device is going to connect needs password, you need to fill the password in this blank.

Local Wireless Name - Enter a value of up to 32 characters. The same Name (SSID) must be assigned to all wireless devices in your network.

Region - Select your region from the pull-down list. This field specifies the region where the wireless function of the Device can be used. It may be illegal to use the wireless function of the Device in a region other than one of those specified in this filed. If your country or region is not listed, please contact your local government agency for assistance.

When you select your local region from the pull-down list, the Note Dialog of TERMS OF USE will pop up. Select I agree to these terms of use, and click Accept to continue.

84