Samsung NP-X1-C001/SEB manual IntelR PRO/Wireless 2915ABG Network Connection

Intel(R) PRO/Wireless 2915ABG Network Connection

Product Specification

Item		Detailed Specifications
Physical	Dimensions	(Width X Height) 59.75 X 44.45 mm
Specifications
	operation temperature and	Same as system operation
	humidity
		Temperature: 0°C ~ 70°C
		Humidity: less than 85%
Power Specification	Power Saving Mode	135 mW
	Receiving Mode	0.85 W
	Transmission Mode	1.45 W
	Power	3.3V
Network	Compatibility	IEEE802.11a, IEEE802.11b, IEEE802.11g
Specifications
	Operating System	Microsoft Windows XP
		- NDIS5 Miniport Driver
	Media Access Protocol	CSMA/CA (Collision Avoidance) with
		Acknowledgement(ACK)
	Security	Wired Equivalent Privacy support (WEP) 64bit / 128bit
		WPA*, CCX*

*This piece of equipment supports the Wi-Fi wireless LAN security standard, WPA (Wi-Fi Protected Access) and CCX (Cisco Compatible eXtensions). To connect to a wireless network consisting of the WPA and CCX, certificates or PROSet may be required depending on the network settings. For driver update, visit www.samsung.com and for information on the PROSet installation, refer to 'Wireless Network Setup Using the Wireless LAN Setup Program' (p77). For more information, ask your network administrator.

Radio Specifications

RF Band	2.4GHz, 5GHz
Support Channels	Channels allowed per country.
Device	Transceiver
Standard Output Power	5 mW
Transmission Method	11a mode: OFDM
	11b mode: DSSS
	11g mode: OFDM
Transmission Rate (Mbps) *	11a mode**
	11b mode: 11, 5.5, 2, and 1
	11g mode*** : 54, 48, 36, 24, 18, 12, 9, and 6
Antenna Type	Internal Antenna 2 EA (Main/Aux)

*The transmission rate may differ from the actual transmission rate.

**11a mode is supported only when the device is connected with an IEEE802.11a device (e.g. IEEE802.11a compatible Access Point).

***11g mode is supported only when you are connected to an IEEE 802.11g device (e.g. An Access Point supporting IEEE 802.11g).

Specifications 151