Turning Off Unnecessary Devices

Turning off unnecessary devices extends the battery use time.

Select the Start > Control Panel > Performance and Maintenance > System > Hardware tab and click Device Manager. Right-click a device you are not using, and select 'Disable' (e.g. wireless LAN, IEEE 1394 , etc.)

Battery Calibration

If you charge/discharge the battery repeatedly for only a short time, the battery use time may be reduced by the difference between the actual battery charge and the remaining charge display. In this case, the actual battery charge and the remaining charge display will be same by discharging the battery completely using the Battery Calibration function, and then recharging it again.

1.Disconnect the AC power adapter after turning off the system.

2.Restart your computer and press <F2> to enter BIOS setup.

3.Using the arrow keys, highlight Smart Battery Calibration in the Boot menu. The Battery Calibration function is activated and the battery is discharged forcibly. This operation requires 3~5 hours depending on the battery capacity and the remaining battery charge.

4.When the calibration process is complete, recharge the battery fully.

System Management 113