- A fixed IP is recommended for a small-size network.
Q7 When using a
AIt may happen occasionally when you are using a
Q8 Running Help file while running Profile Wizard in the wireless LAN program (PROSet) makes the PROSet window white.
AIt will be displayed properly when you finish the profile wizard. It dose not affect the program operation.
Q9 The network does not operate properly when both the wireless and the wired network connections are simultaneously configured with the same IP address.
AYou cannot use the wireless and the wired network connections using the same IP address simultaneously. To use either the wireless or the wired network in turn with the same IP address, you have to Disable whichever network device will not be using in the network connection of the Control Panel.
Q10 The wireless LAN does not work properly when there is a device operating on an adjacent frequency in the vicinity of the product.
A1 Channel interference may occur when a wireless video transceiver or a microwave oven is being used.If you experience channel interference from other equipment, it is recommended changing the channel to connect to the AP. For more information about AP settings, refer to the User Manual supplied by the AP manufacturer.
A2 IEEE802.11g equipment operates in hybrid mode when there is active IEEE802.11b equipment. This may result in data rate degradation.
Q11 An established wireless LAN connection is disconnected after 2~3 minutes, and the connection is not recovered.
A1 This may be caused by channel interference. Change the channel of the AP, and reconnect.
