Lexmark 90T3100, S315 manual Configuring the printer wirelessly using WPS Windows only, Wireless

Networking 70

For Macintosh users

1From the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder.

2Double‑click Wireless Setup Assistant.

3Follow the instructions on the computer screen.

Configuring the printer wirelessly using WPS (Windows only)

With Wi‑Fi Protected Setup (WPS), it is easy to add computers or printers to your wireless network because the SSID and WPA passphrase are automatically detected and configured for you.

1Make sure your access point (wireless router) supports WPS.

2Insert the installation software CD and follow the instructions on the computer screen.

Notes:

•If you are using the PIN method to add your printer using WPS, then make sure you type all eight digits when you are asked to enter your PIN.

•To use WPS to configure the printer wirelessly, all of the devices on your wireless network must support WPS. If any device on your network does not support WPS, then you must type the SSID and security information when prompted.

Configuring Wi‑Fi Protected Setup manually

Note: Make sure your access point (wireless router) is Wi‑Fi Protected Setup (WPS) certified. For more information, see the User’s Guide.

If your printer or device has not yet been configured for wireless connection and you want to configure it using WPS, then push the WPS button on the wireless router. Wait for the printer control panel to display a message to begin WPS configuration. There might be a short delay before the message appears. If nothing happens after 30 seconds, then do one of the following:

USE THE PUSH BUTTON CONFIGURATION (PBC) METHOD

1From the printer control panel, navigate to:

> Setup > OK > Network Setup > OK > Wireless 802.11b/g/n > OK > Wi‑Fi Protected Setup > OK > WPS PBC Mode > OK

2Follow the instructions on the printer display.

USE THE PERSONAL IDENTIFICATION NUMBER (PIN) METHOD

1From the printer control panel, navigate to:

> Setup > OK > Network Setup > OK > Wireless 802.11b/g/n > OK > Wi‑Fi Protected Setup > OK > WPS PIN Mode > OK

2Follow the instructions on the printer display.

OK

OK

> Network Connection Setup >

> Network Connection Setup >

OK

OK

> Wireless >

> Wireless >