Lexmark S315 Temperature information, Power consumption, Product power consumption, Power Saver

Notices 131

ENERGY STAR

Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark.

Temperature information

Ambient temperature	15 to 32C (60 to 90F)
Shipping and storage temperature	-40 to 60C (-40 to 140F), 1 to 60C (34 to 140F)

Power consumption

Product power consumption

The following table documents the power consumption characteristics of the product.

Note: Some modes may not apply to your product.

Mode	Description	Power consumption
		(Watts)
Printing	The product is generating hard‑copy output from electronic inputs.	15.9
Copy	The product is generating hard‑copy output from hard‑copy original documents.	15.2
Scan	The product is scanning hard‑copy documents.	11.0
Ready	The product is waiting for a print job.	5.75
Sleep Mode	The product is in a high‑level energy‑saving mode.	2.75
Off	The product is plugged into a wall outlet, but the power switch is turned off.	0.33

The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average.

Values are subject to change. See www.lexmark.com for current values.

Power Saver

This product is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to the Sleep Mode. The Power Saver Mode saves energy by lowering power consumption during extended periods of inactivity.