Lexmark 90T3100 For Macintosh users with an AirPort base station, Click Advanced or Configure

Networking 86

dIn the Wireless settings section, look for the SSID.

eWrite down the SSID.

Note: Make sure you copy it exactly, including any capital letters.

2Obtain the SSID of the network that the printer is connected to: a From the printer, print a network setup page.

b In the Wireless section, look for SSID.

3Compare the SSID of the computer and SSID of the printer.

If the SSIDs are the same, then the computer and the printer are connected to the same wireless network.

If the SSIDs are not the same, then run the utility again to set up the printer on the wireless network used by the computer.

For Macintosh users with an AirPort base station

In Mac OS X version 10.5 or later

1From the Apple menu, navigate to: System Preferences > Network > AirPort

The SSID of the network that the computer is connected to is displayed in the Network Name menu.

2Write down the SSID.

In Mac OS X version 10.4 or earlier

1From the Finder, navigate to: Applications > Internet Connect > AirPort

The SSID of the network that the computer is connected to is displayed in the Network menu.

2Write down the SSID.

For Macintosh users with an access point

1Type the IP address of the access point in the address field of your Web browser and continue to step 2. If you do not know the IP address of the access point, then do the following:

aFrom the Apple menu, navigate to: System Preferences > Network > AirPort

bClick Advanced or Configure.

cClick TCP/IP.

The Router entry is typically the access point.

2Type your user name and password when prompted, and then click OK.

3In the Wireless settings section, look for the SSID.

4Write down the SSID, security type, and the WEP key/WPA passphrase (if shown).

Notes:

•Make sure you copy the network information down exactly, including any capital letters.

•Store the SSID and the WEP key or WPA passphrase in a safe place for future reference.