Lexmark 90T3100, S315 Scanning to a network computer, Scanning to a flash drive or memory card

Scanning 52

Scanning to a network computer

1Load the original document faceup into the ADF or facedown on the scanner glass.

2From the printer control panel, navigate to: > Scan > OK > Computer

3Press the left or right arrow button to manually select the name of the destination computer, and then press OK .

Notes:

•You may be prompted to enter a PIN if the computer requires it.

•To assign a computer name and a PIN to the computer, see the Help for the printer software associated with your operating system.

4Press the up or down arrow button to scroll to the scan option you want to set, and then press the left or right arrow button to scroll to the setting you want.

Set the color, quality, original image size, and other scan options. If necessary, press OK each time you make a selection.

5Press .

Note: For Macintosh users, you may need to enable scanning to your computer through Image Capture to scan documents using a network printer and save the scan output.

Scanning to a flash drive or memory card

Notes:

•Some features are available only in select printer models.

•Make sure your flash drive or memory card is not write‑protected.

1Load the original document faceup into the ADF or facedown on the scanner glass.

2From the printer control panel navigate to: > Scan > OK > Memory Device

3Insert the flash drive or memory card, and then press OK .

Note: The printer reads only one memory device at a time.

4Press the up or down arrow button to scroll to the scan option you want to set, and then press the left or right arrow button to scroll to the setting you want.

Set the color, quality, original image size, and other scan options. If necessary, press OK each time you make a selection.

5Press .

Follow the instructions on the printer display.