Lexmark 90T3100, S315 Using a flash drive with the printer, Printing photos from a flash drive

Printing 36

Using a flash drive with the printer

Make sure the flash drive contains files that are supported by the printer. For more information, see “Supported file types” on page 35.

1Insert a flash drive into the USB port.

		E
		IV
	D	R
SH
A
FL

Notes:

•The flash drive uses the same port that is used for a PictBridge camera cable.

•An adapter may be necessary if your flash drive does not fit directly into the port.

Warning—Potential Damage: Do not touch any cables, any network adapter, any connector, the memory device, or the printer in the areas shown while actively printing, reading, or writing from the memory device. A loss of data can occur.

2Follow the instructions or select from available options on the printer display.

Note: If the printer does not recognize the memory device, then remove and reinsert it.

Printing photos from a flash drive

1Load photo paper.

2Insert a flash drive or digital camera set to mass storage mode.

3Use the up or down arrow button to select a photo printing option, and then press OK .

•Select and Print allows you to choose a layout, the number of photos per page, paper settings, photo size, photo quality, and to sharpen the quality of graphics.

•Print Photos allows you to print all photos, selected photos by photo range, and print photos using predefined photo size templates.

4To adjust the print settings, press the up or down arrow button to scroll to the option you want to set, and then press the left or right arrow button to scroll to the setting you want. If necessary, press OK to make a selection.

5Press.

Note: For best results, allow the prints to dry at least 24 hours before stacking, displaying, or storing.