Lexmark 90T3100, S315 manual Software did not install, Print job does not print or is missing pages

Troubleshooting 96

3To confirm the setting, press the left or right arrow button to scroll to Yes, and then press OK .

Software did not install

If you encountered problems while installing, or if your printer does not appear in the list in the printers folder or as a printer option when sending a print job, then try uninstalling and reinstalling the software.

Before you reinstall the software, do the following:

MAKE SURE THAT YOUR COMPUTER MEETS THE MINIMUM SYSTEM REQUIREMENTS

TEMPORARILY DISABLE SECURITY PROGRAMS IN WINDOWS BEFORE INSTALLING THE SOFTWARE

CHECK THE USB CONNECTION

1Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.

2Firmly plug the square end of the USB cable into the back of the printer.

3Firmly plug the rectangular end of the USB cable into the USB port of the computer.

The USB port is marked with .

Note: If you continue to have problems, then try another USB port on the computer. You may have connected to a defective port.

RECONNECT THE PRINTER POWER SUPPLY

1Turn off the printer.

Note: Make sure the printer is not in Sleep mode. Press and hold for three seconds to turn off the printer.

2Unplug the power cord from the wall outlet, and then pull out the power cord from the power supply.

3After one minute, reconnect the power cord into the power supply, and then plug the power cord into the wall outlet.

4Turn on the printer.

Print job does not print or is missing pages

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:

MAKE SURE THE INK CARTRIDGES ARE INSERTED CORRECTLY

1Turn the printer on, and then open the printer.

2Make sure the cartridges are inserted correctly.

The cartridges should click firmly into the matching color slot of the printhead.

3Close the printer.