Lexmark 90T3100, S315 Copying an ID card, Enlarging or reducing images, Adjusting copy quality

Copying 46

When you select color or black‑only printing, the light that corresponds to your choice comes on.

7Press .

Note: The selected copy settings are reset to the factory default after two minutes of printer inactivity.

Copying an ID card

1Load plain A4‑ or letter‑size paper.

2From the printer control panel, navigate to:

> Copy > OK > ID Card Copy

3Press , and then load the front side of the ID card facedown at the placement corner of the scanner glass.

4Press .

5When prompted to copy the back side of the ID card, press the left or right arrow button to scroll to Yes, and then press OK .

6Load the back side of the ID card facedown at the placement corner of the scanner glass, and then press .

Enlarging or reducing images

1Load paper.

2Load the original document facedown on the scanner glass.

3From the printer control panel, navigate to: > Copy > OK > Scale

4Press the left or right arrow button to scroll to the Scale setting you want.

Notes:

•If you select Custom %, then press OK , and then press the left or right arrow button to select a custom percent value. Press OK to save the setting.

•If you select Borderless, then the printer will reduce or enlarge the document or photo as necessary to print a borderless copy on the paper size that you selected. For best results with this setting, use photo paper and set the paper type to Photo.

•If you select Fit to Page, then the printer scales the document or photo proportionately to fit a single page.

5Press .

Adjusting copy quality

1Load paper.

2Load the original document faceup into the ADF or facedown on the scanner glass.

3From the printer control panel, navigate to:

> Copy > OK > Quality