Emulex 375 manual Connecting Ports Through Hard Zoning, To set up Hard Zoning

EMULEX MODEL 375 SAN STORAGE SWITCH	CHAPTER 3: SWITCH MANAGEMENT
USER’S GUIDE

Connecting Ports Through Hard Zoning

A Hard Zone can be used to add a separate 126 AL_PAs that operate in isolation from any other zone. A Hard Zone disables switching functionality and creates a shared connection between the ports in a zone topology, splitting the switch into multiple unique FC-AL zones. When Hard Zoning is enabled, all switch zones must be Hard Zones. A combination of Hard Zones and regular zones on a single switch is not allowed.

Caution: Do not set a Hard Zone for ports in multiple zones or share ports that have the Hard Zone option set. This will cause errors that do not log an event or display a message.

The advantages of Hard Zoning include:

•Each Hard Zone contains 126 available AL_PAs.

•The switch can be configured to contain up to eleven isolated Hard Zones. The limitations of Hard Zoning include:

•2 Gb of shared bandwidth over the entire Hard Zone.

•Ports in a Hard Zone cannot use the Stealth Intelligent Change Manager.

•Automatic Trunking and route blocking are not allowed in a Hard Zone.

•Ports in a Hard Zone cannot be set to a string or tree cascade configuration.

•Device AL_PAs on a port in a Hard Zone cannot be displayed.

The Hard Zone setting is available on the One-Step Zoning page. To view the page, click Advanced Functions > One-Step Zoning.

Figure 3-19: Hard Zoning configuration

To set up Hard Zoning:

1.Determine which ports will reside in each Hard Zone and ensure that the ports are in only one Hard Zone.

2.Under Hard Zone, select the check boxes for the appropriate zones.

3.Click Submit.

EMULEX CORPORATION 44

PART NUMBER 00041392-002 REV. B