TP-Link TL-WA7210N manual 2.4GHz 150Mbps Outdoor Wireless Access Point User Guide,  Note

TL-WA7210N

2.4GHz 150Mbps Outdoor Wireless Access Point User Guide

Note:

Ensure you select a correct country to comply with local laws. Incorrect settings may cause interference.

Transmission Power - The available options of transmission power are determined by the region selected.

Wireless Security Mode - You can select one of the following security options:

WPA/WPA2-PSK- Select WPA based on pre-shared passphrase.

WEP - Select WEP based on none pre-shared passphrase.

No Security - The wireless security function is disabled. The wireless stations will be able to connect the Device without encryption.

Auth Type - This option should be chosen if the Security Mode is WEP. It indicates the authorization type of the Root AP.

Key Format - This option should be chosen if the Security Mode is WEP. It indicates the format of the WEP key.

Wireless Password - If the AP your Device is going to connect needs password, you need to fill the password in this blank.

Dynamic IP- When the Device connects to a DHCP server, or the ISP supplies you with DHCP connection, please choose this type. The Device will get the IP address automatically from the DHCP server or the ISP if you choose the Dynamic IP type.

1)If you choose Dynamic IP in Figure 3-16and then click Next, Figure 3-20will appear.

Figure 3-19 MAC Clone

Most Cable ISPs (Internet Service Provider) register the unique MAC Address from the wired connection on your MAIN COMPUTER - the last computer used to be connected with the Cable Modem and had Internet connection.

If you add a router to the network, your ISP may not recognize the MAC address of the router and not allow it to connect.

However, TP-LINK router can "clone" or replicate the registered MAC address of the MAIN COMPUTER. Then your ISP can release the Internet connection to the router and all the computers.

Click the Next button to continue, or the Back button to return to the previous page.

21