ENGLISH
14REMOTE CONTROL
REMOTE CONTROL
The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the monitor set correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching 
and 
ends to the label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
yyDo not mix old and new batteries, as this may damage the remote control.
yyMake sure to point the remote control to the remote control sensor on the monitor set.
(POWER) | ENERGY SAVING( ) |
Turns the monitor set on or off. | Adjusts the brightness of |
| the screen to reduce energy |
MONITOR ON | consumption. |
| |
Turn on the monitor. |
|
MONITOR OFF | INPUT | |
Turn off the monitor. | Selects the input mode. | |
1/a/A Button | 3D | |
Toggles between numerical | This button does not apply to | |
this model. | ||
and alphabetical. | ||
|
| Number and Alphabet Buttons |
| Enters numerical or alphabetical |
ARC | characters depending on the |
Selects the Aspect Ratio | setting. |
Mode. |
|
Volume Up / Down 
Adjusts the volume level.
PSM
Selects the Picture Status
Mode.
MUTE 
Mutes all sounds.
CLEAR
Deletes the entered numerical or alphabetical character.
BRIGHTNESS Key Adjust the brightness by pressing the Up and Down buttons on the remote control. In USB mode, the OSD menu has the Page function to move to the next file list.
