GENERAL SETTING

HDMI (cont’d)

2 HDMI Audio (Default : ON)

If you do not want to output the audio through HDMI (when you digitally output the audio through the COAXIAL DIGITAL AUDIO OUT jack to your audio system, etc.), you can set the HDMI audio output off.

Use [K / L] to select a setting, then press [ENTER].

• Set to “OFF” when the HDMI sound is not output.

HDMI Audio

ON

OFF

Your setting will be activated.

3 RGB Range (Default : Normal)

You can adjust the RGB range to make the dark areas of the HDMI images brighter.

Use [K / L] to select a setting, then press [ENTER].

Select “Enhanced“ if the black-white contrast is not clear.

This setting is effective only for HDMI RGB output.

RGB Range

Normal

Enhanced

Your setting will be activated.

EN 109

Disc Introduction Connections Basic Setup Management Recording Playback Editing Function Setup VCR Function Others

E9SK0UD_DVR670KU_EN_v1.1.indd 109

2009/04/03 15:40:07

Page 109
Image 109
Toshiba DVR670KU owner manual Hdmi cont’d, Hdmi Audio Default on, Set to OFF when the Hdmi sound is not output