Toshiba DVR670KU Information on VCR Functions, Recording, Setup VCR Function Others

VCR FUNCTIONS

Information on VCR Functions Recording

Introduction

Caution on using S-video, component, or HDMI connection for VCR:

•Only the playback audio / video are available with these connections.

•Under the conditions listed below, the playback image and audio cannot be output. Use the standard video connection, in such case;

-during DVD recording.

-when L3 (DV-IN) is selected.

•HDMI video resolution cannot be changed when the unit is in VCR mode.

Playback

1)Press [I/y ON/STANDBY] on the remote control or the front panel of the unit.

When you are playing back a cassette tape, turn on the TV and be sure to select the input to which the unit is connected.

Press [VCR].

2)Insert a prerecorded cassette tape. Press [PLAY B] to begin playback.

3)During playback, press [PAUSE F]. Playback will pause and sound will be muted.

4)Press [PLAY B] to resume playback.

5)Press [STOP C] to stop playback.

6)Press [OPEN/CLOSE A] to eject the cassette tape.

Note

• When a cassette tape ends during playback, fast-

forward or normal recording, the unit will

automatically rewind to the beginning of the

cassette tape. After rewinding finishes, the unit will

Press [VCR] first.

Before recording, make sure:

•The desired channel is selected by pressing [the Number buttons] or [CH / ].

•There is a cassette tape with an erase-protection tab in the unit.

•The desired recording speed is selected in SP (standard playback) or SLP (super long playback) mode by pressing [REC MODE].

Recording speed:

Tape speed	Recording / playback time
Type of tape	T60	T120	T160
SP	1hour	2hours	2-2/3hours
SLP	3hours	6hours	8hours

• Refer to pages 50-54 for instructions on timer recording.

1)Press [REC I] to begin the recording.

To temporarily stop recording or to resume it, press [PAUSE F]. After the unit has been in pause mode for 5 minutes, it will stop automatically to protect the cassette tape and the video head from damage.

2)Press [STOP C] when the recording is completed.

Accidental erasure prevention

To prevent accidental recording on a recorded cassette tape, remove its erase- protection tab. To record on it later, cover

Disc Connections Basic Setup Management Recording Playback Editing

eject the cassette tape.

• When a cassette tape without erase-protection tab is

inserted, the unit will start playback automatically.

• Tracking will be automatically adjusted upon

the hole with cellophane tape.

Note

erase-protection tab

Function

playback. To adjust the tracking manually, press
[CH	/ ].
• Playback will stop when you change the output
mode.

•This function is available only when the unit is connected by the VIDEO OUT jack.

Setup VCR Function Others

EN 111

E9SK0UD_DVR670KU_EN_v1.1.indd 111

2009/04/03 15:40:09