Toshiba DVR670KU 4, 8, 7, 6, 5

51EN
Disc
Management Recording PlaybackIntroduction Connections Basic Setup Editing Function Setup VCR Function Others
4 Use [K / L / { / B] or [the Number
buttons] to enter the start and end
time, then press [B].
Date
SP 2 : 00
Start End
- - : - -
Mode
SP
CH REC To
DTV125- 1 DVD
JAN/02 1 : 00AM
• You cannot make a program which recording
time exceeds 12 hours.
5 Use [K / L] to select analog (“- - -”) /
digital (“DTV”) mode or external
input (L1 / L2), then press [B].
Date
SP 1 : 00
Start End
Mode
SP
CH REC To
DVD
JAN/02 2 : 00AM1 : 00AM
L1
To record from external input (e.g., cable/
satellite box), select L1 or L2.
Use [K / L] to select the channel number to
record.
For digital mode, select both major and minor
channels. Refer to “How to select a channel
number for the timer recording” on page 52 for
more details.
e.g.) analog mode
Date
SP 1 : 00
Start End
Mode
SP
CH REC To
DVD
JAN/02 2 : 00AM1 : 00AM
10
e.g.) digital mode
Date
SP 1 : 00
Start End
Mode
SP
CH REC To
JAN/02 2 : 00AM1 : 00AM
DTV125- 1 DVD
6 Use [K / L] to select a recording media
(“DVD” or “VCR”), then press [B].
Date
SP 1 : 00
Start End
Mode
SP
CH REC To
JAN/02 2 : 00AM1 : 00AM
DTV125- 1 DVD
7 Use [K / L] to select a recording
mode.
Date
SP 1 : 00
Start End
ModeCH REC To
JAN/02 2 : 00AM1 : 00AM
DTV125- 1 DVD SP
Refer to “Recording Mode” on page 45 for DVD or
“Recording” on page 111 for VCR.
• You can check the remaining recordable space
of the disc when you select the recording
mode.
Date
SP 1 : 00
Start End
ModeCH REC To
JAN/02 2 : 00AM1 : 00AM
DTV125- 1 DVD SP
Auto recording mode select (DVD only) ...
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
determines the appropriate recording mode to
complete recording the program.
Date
Auto 1 : 00
Start End
ModeCH REC To
JAN/02 2 : 00AM1 : 00AM
DTV125- 1 DVD Auto
• “Auto” is only available for one program in the timer
program list.
• The recording may be cut short, when the available
recording space of the disc is too limited.
8 Press [ENTER] when all items are
entered.
After displaying an instructive message for 10
seconds, timer program list will appear.
Press TIMER SET to Timer standby mode.
When Timer Set on DVD or VCR,
it is not available in the standby mode.
Press TIMER SET to cancel the standby mode.
Timer Programming
THU JAN/01 11:00AMSP (1:00)
JAN/ 2/09 1:00 AM 125-01 SP
Date Start End CH
JAN/02 12:00AM 1:00AM DTV125-1
Your program setting will be stored.
• To set another program, repeat steps 2 to 7.
• To exit, press [TIMER PROG.] or [SETUP].
• When 2 or more programs are overlapped,
“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
To correct the timer program refer to
“Checking, canceling, or correcting the timer
programming information” on page 53.
TIMER RECORDING
Instructions continue on the next page.