Toshiba DVR670KU owner manual Symptom, Press OPEN/CLOSE a, Repairing process MAY not work, Rec

TROUBLESHOOTING

Symptom

The unit starts playing back the disc automatically.

Remedy

• The DVD-video features an auto playback function.

Some functions such as stop, search, or slow-motion playback cannot be performed.

•Depending on the disc, you may not be able to do some of the operations. Refer to the instruction manual supplied with the disc.

The language for the sound track cannot be changed.

•The title does not have the multilingual audio tracks.

•The DVD-video prohibits the changing of the language for the sound track.

The subtitle language cannot be changed or turned off.

• Multilingual subtitle are not recorded on the DVD-video.

	The angles cannot be changed.				• Multi-angles are not recorded on the DVD-video being played back.
					• The angle-change operation is whenever possible as long as the disc
					contains a multi-angle portion. Actual change will be performed when
					the portion has come up.
					• The DVD-video prohibits changing angles.
					• Try changing the angle using the DVD-video’s menu.
	Recording does not stop immediately				• It may take a few seconds for the unit to input disc data before
	after you press [STOP C].				recording stops.
	The disc tray does not open when you				• It may take a few seconds for the disc tray to open after you have recorded
	press [OPEN/CLOSE A].				or edited a disc. This is because the unit is adding disc data to the disc.
	“Repairing” appears on the TV screen.				• If there is a power failure or unplugging during recording, finalizing,
D					formatting or editing (even after “Repairing” disappears), a repairing
					process will begin automatically just after turning the unit on again.
V		Repairing
					It may take several minutes up to about several hours.
D In a case you intend to cancel the					• If you intend to cancel the repairing process, press [AOPEN/CLOSE]
	repairing process.				on the front panel, then select “Yes” and press [ENTER]. After that, press
					[OPEN/CLOSE A] to take out the disc. The disc canceled during the
			Do you want to cancel a repairing		repairing process MAY NOT work.
			process ? When selecting “Yes”,
			the disc may not be usable.
				Yes
				No
		Repairing
	No image from HDMI connection.				• Check the HDMI connection. (Check the status of the HDMI related indications.)
					• Check whether the connected monitor device or other device supports
					HDCP. (This unit will not output a video signal unless the other device
					supports HDCP.)
					• Check the setting of HDMI.
					• Check whether the output format of this unit (HDMI FORMAT) matches
					the supported input format of other connected device.
					• If the unit is connected to the unauthorized display device with an
					HDMI cable, the audio/video signal may not be output when playing
					back a commercial DVD-video.
	There is no sound or the sound is				• The HDMI sound is not output when “HDMI Audio” is set to “OFF”.
	distorted.				• Check the RCA audio cable connection. If you are using HDMI-DVI
					conversion cable, you must connect the RCA audio cable, too.
					• Check whether the output format of this unit (HDMI FORMAT) matches
					the supported input format of other connected device.
	Setup menu cannot be called up.				• Setup menus cannot be called up during DVD recording and playback.
	There is no picture.				• If you connect the cable to S-VIDEO OUT/ COMPONENT VIDEO OUT /
					HDMI OUT jack, connect it to AUDIO / VIDEO OUT jack instead.
	Picture noise appears.				• Head cleaning for VCR may be necessary. Refer to “Auto head cleaning”
					(page 5).
V					• Adjust tracking control for better picture by pressing [CH / ] while
					you are playing back a cassette tape.
C
	The cassette tape does not play back.				• No cassette tape is inserted.
R	The tape ejected after you press				• Make sure the cassette tape has an erase-protection tab when you record
	[REC I].				to a cassette tape. If needed, cover the hole with cellophane tape.
	The remote control does not function.				• Check if a cassette tape is in this unit.
	The motor rotates even when				• The motor may rotate for the duration of approximately 5 minutes for
	playback / recording is stopped.				efficient operation. This is not a malfunction.

116 EN

E9SK0UD_DVR670KU_EN_v1.1.indd 116

2009/04/03 15:40:15