Panasonic DMC-ZR1 Setting Date/Time (Clock Set)

VQT2G33 (ENG)
14
Preparation
Setting Date/Time (Clock Set)
•The clock is not set when the camera is shipped.
Press [MENU/SET].
Press 2/1 to select the items (year , mont h,
day, hour, minute, display seque nce or time
display format), and press 3/4 to set.
‚: Cancel without setting the clock.
Press [MENU/SET] to set.
•After completing the clock settings, turn the camera off. Then turn the camera back on,
switch to Recording Mode, and check that the dis play reflects the settings that were
performed.
•When [MENU/SET] has bee n pressed to complete the settings without the clock having
been set, set the clock correc tly by following the “Chang ing the clock sett ing” procedure
below.
Select [CLOCK SET] in the [REC] or [SETUP] m enu, and press 1.
•It can be changed in steps 3 and 4 to set the clock.
•The clock setting is maintained for 3 months using the built-in clock battery even
without the battery. (Leave the charged battery in the unit for 24 hours to charge the
built-in battery.)
Turn the camera on.
•The [PLEASE SET THE CLOCK] message appears.
(This message does not appear in [PLAYBACK]
Mode.)
A[MENU/SET] bu tton
BCursor buttons
Changing the clock setting
DMC-ZR1P-VQT2G33_eng.book 14 ページ ２００９年７月７日 火曜日 午後３時３３分