Panasonic DMC-ZR1 Inserting and Removing the Card (optional)/the Battery

13
(ENG) VQT2G33
Preparation
Inserting and Removing the Card (optional)/the
Battery
•Check that this u nit is turned off.
•We recommend using a Panasonic card.
Slide the release lever in the direction of
the arrow and open the card/battery door.
•Always use genuine Panasonic batteries
(DMW-BCG10PP).
•If you use other batteries, we cannot guarantee
the quality of this product.
Battery: Insert until it is locked by the
lever A being careful about the direction
you insert it. Pull the lever A in the
direction of the arrow to remove the
battery.
Card: Push it fully until it clicks being
careful about the direction you insert it.
To remove the card, push th e card unt il it
clicks, then pull the card out upright.
B:Do not touch the connection terminals of the
card.
•The card may be damaged if it is not fully inserted.
1:Close the card/battery door.
2:Slide the release lever in the direction
of the arrow.
•If the card/ba t tery door can no t be complet e l y
closed, remove the card, check its direction and
then insert it again.
DMC-ZR1P-VQT2G33_eng.book 13 ページ ２００９年７月７日 火曜日 午後３時３３分