Water pressure too low.
Supply hose kinked or trapped.

Fault

Possible cause

Action

Detergent residue in theDetergent was damp or lumpy. detergent dispenser.

Clean and dry the detergent dispenser; see Page￿51.

Use the dispensing aid for liquid detergents.

Water does enter the Water tap not turned on. machine or detergent is

not washed away.

•Water tap closed?c"

indicated in the display Strainer in supply hose clogged. field.

•Water tap closed?" is Safety function has detected an displayed even though appliance fault.

lot of water has run in.

Turn on water tap.

Programme continues.

Eliminate the cause.

Clean the filter; see Page￿54.

Eliminate the cause.

Do not open the door, as water may run out! Repeatedly select the •Drain" programme. When the appliance has been completely drained, the washing can be removed. Call customer service.

Water

cannot be

seen Thisin

is

not

a

 

fault.

 

 

 

 

 

 

drum.

 

 

 

The

water

lies

below the

visible

part of

the

drum.

 

 

Washing

solution

is not Loose

debris

is

blocking

the pumpClean.

the

pump

(refer to

Page￿52).

completely

drained.

 

 

 

 

 

 

 

 

 

 

 

•Pump

blocked?"

The

water

drainage pipe

and/or

Clean

the

water

drainage

pipe

 

 

 

 

indicated

in

the

display drain

hose

is

blocked.

 

and/or

drain hose.

 

field.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Water is flowing out from underneath the machine.

The thread of the supply

hose is Tightennot

the

thread.

tight.

 

 

 

Leak in the drain hose.

Replace

the

drain hose.

Foam coming out of theTo much detergent.

Mix 1 tablespoon of fabric

softener

detergent

dispenser.

 

 

 

 

with ½￿litre /

1￿pt of water

and pour

 

 

 

 

 

 

into chamberII￿ of the detergent

 

 

 

 

 

 

dispenser.

 

 

 

 

 

 

 

 

Reduce the amount of detergent next

 

 

 

 

 

 

time.

 

 

Repeated

spinning.

This

is

not a

fault.

Always load largeand small items

 

 

The

imbalance

compensation

systemtogether into

the drum.

 

 

 

is attempting to balance the load

 

 

 

 

through

repeated spins.

 

 

 

58

Page 58
Image 58
Bosch Appliances WFR 3230 instruction manual Fault Possible cause