Olympus DM-450, DM-550 manual Installing Software, Changing the Installation Destination

Installing Software

Macintosh

1Insert "Olympus Sonority" into the CD-ROM drive.

•Proceed to step 3 when the content of CD-ROM is displayed, and go to step 2 and 3 when nothing is displayed.

2Opening contents in the CD-ROM with [Finder].

3Double-click [setup] in the CD- ROM.

4When the "Olympus Sonority" launch screen is displayed, click the desired language to select it.

5When [Olympus Sonority Setup] is clicked, the installer opening screen will start up. Follow the Installer wizard instructions.

6Confirm your acceptance of the terms of the licensing agreement.

•You must accept the terms of the licensing agreement to install "Olympus Sonority". After checking the [Agree] box, click [Next].

7[Changing the Installation Destination]

•The installation destination can be changed. Click [Next] if you do not want to change (Select [Change Installation Destination] if you want to change).

8[Start Installation]

•When the installation is completed, the completed [Installer] screen will be displayed.

•To connect the recorder to a PC, refer to "Connecting to Your PC" ( P.80), to start up the "Olympus Sonority", refer to "Running Olympus Sonority" ( P. 82).

•After starting up the "Olympus Sonority", the serial number entry dialog box will appear. Serial number which is listed on the separate sheet. After entering, click [OK] and the "Olympus Sonority" will start up.

5

Installing Software

EN

77