Olympus DM-450 Start Time setting, Volume setting, Alarm Sound setting, Playback File setting

Menu setting method

Select [Every Week] and press the OK or 9 button to move to the selection of [Day]. Press the + or – button to select a day of the week.

2 Press the OK button to exit [Day] selection.

[Start Time] setting:

1 Press the 9 or 0 button to select "Hour"and "Minute" in the [Start Time] and "Hour" and "Minute" in the [Stop Time].

2 Press the + or – button to set.

3 Press the OK button to exit [Start Time] selection.

[Volume] setting:

1 Press the + or – button to adjust the volume. Press the PLAY ` button to check the volume.

2 Press the OK button to exit [Volume] selection.

[Alarm Sound] setting:

1 Press the + or – button to select an alarm sound from among [Alarm1], [Alarm2] and [Alarm3]. Press the PLAY ` button to check the alarm sound.

2 Press the OK button to exit [Alarm Sound] selection.

[Playback File] setting:

1 Press the + or – button to select from [No File Play], [File Select].

[No File Play]: Sounds alarm only.

[File Select]: Plays back a selected file after the alarm.

•When [File Select] is selected and the OK or 9 button is pressed, the recorder will move to the [Memory Select] setting.

•Select the memory with an alarm playback file using the + or – button and press the OK or 9 button. The recorder will move to the folder settings with the file with alarm playback.

•Select the folder using the + or

– buttons and press the OK or 9 button to move to file selection.Use

the + or – button to select the file in the same way.

2 Press the OK or 9 button to exit [Playback File] selection.

6Completing the setting.

1 Pressing + or − button to select [Finish].

2 Press the OK or 9 button to complete the setup screen.

Programmed settings will be applied and the screen will return to the preset number selection menu. If the [On/Off]

setting is set to [On], will appear on the display.

a When setting to [On]

a

When setting other preset numbers, repeat Steps 2 through 6.

When the 9 button is pressed in the Select in Advance Menu, the settings selected can be confirmed.

7Press the F2 or STOP 4 button to complete the setting.

• The will appear on the display.

4

Menu setting method

EN

65