Olympus DM-450, DM-550 Vcva standby monitor setting, Refer to Timer Recording Timer Rec P.60

Menu setting method

2Press the 9 or 0 button adjust the start/stop actuation level.

•The VCVA level can be set to any of 15 different values.

•The higher the value, the more

sensitive the recorder to sounds. At the highest value, even the faintest sound will activate recording.

a Level meter (varies according to the sound volume being recorded)

b Start level (moves to the right/left according to the set level)

c Start level/Recording level switch button (Only when [VCVA]:[On],[Rec Level]:[Manual] is set, it is displayed.)

•Press the F1 button to change the recording level during VCVA recording. The recording level can be adjusted.

a

c b

VCVA standby monitor setting:

When [Standby] is set to [On] with the menu setting, the recording will not be output from the earphone while in VCVA standby. When you monitor your recording with the earphone connected, you can check whether VCVA is launched or not by checking if an audio is output.

[On]:

Enables the Standby Monitor function. [Off]:

Disables this function.

Timer Rec

Refer to “Timer Recording [Timer Rec]” ( P.60).

Rec Scene

Refer to “Setting the Recording Scene [Rec Scene]” ( P.62).

4

Menu setting method

•The start/stop actuation level also varies depending on the selected microphone sensitivity mode ( P.47).

•If the starting level is not adjusted within 2 seconds, the display will return to the previous.

•If the surrounding noise is loud, the starting sensitivity of the VCVA can be adjusted according to the recording situation.

•To ensure successful recordings, prior testing and adjustment of the start/stop actuation level is recommended.

EN

49