Uniden XS1215 +1 owner manual Installing the Phone

C.Connect the Main Base and Charging Cradle (XS1215+1 only), and Charge the Handsets

1)	Connect each AC adapter to the DCIN 9V jack and
	to each standard 240V AC wall outlet.
2)	Place one handset in the main base (and the other
	in the charging cradle - XS1215+1 only) with the
	keypad facing forward.
3)	Make sure the charge/in use LED (and charge
	LED - XS1215+1 only) illuminate. If the LED does
	not illuminate, check to see that the AC adapter is	(XS1215+1 only)
	plugged in and the handset makes good contact
	with the cradle's charging contacts.
	• Connect each AC adapter to a continuous power supply.
	• Place each cradle close to the AC outlet to avoid long extension cords.
4)	Charge your handset(s) at least 15-20 hours before
	plugging the phone line.	(XS1215+1 only)
5)	Once the handset battery pack(s) are fully charged,
	connect the telephone line cord to the TEL LINE
	jack and a telephone outlet. If your telephone outlet
	isn't modular, contact your telephone
	company for assistance.
		Australia
		Telephone cord adaptor
	[8]	(not supplied)

￿Use only the supplied AAD- 210 AC adapter. Do not use any other AC adapter.

￿Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard.

INSTALLING THE PHONE