Uniden XS1215 +1 specs

Use only the Uniden (BT-905) rechargeable battery pack supplied with your cordless telephone.

B. Install the Rechargeable Battery Pack into the Handset

The handset(s) are powered by rechargeable battery packs. The battery recharges automatically when the handset is placed in the charging cradle.

1) Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove.

2) Plug the battery pack connector (red & black wires) into the jack inside the battery compartment.

(The connector notches fit into the grooves of the only one way.) Match the wire colors to the polarity label in the battery compartment, connect the battery and listen for a click to insure connection.

3) Make sure you have a good connection by slightly pulling on the battery wires. If the connection is secure, the battery jack will remain in place.

4) Place the battery case cover back in the handset by sliding it upwards until it clicks into place.

Repeat process for second handset (XS1215+1 only).

[7]

Image 8

Uniden XS1215 +1 owner manual Install the Rechargeable Battery Pack into the Handset

Contents

XS1215/XS1215 +1 Contents Welcome Features Controls & Functions XS1215+1 Handset Rocketdial key P Main Base Extra Charging Cradle XS1215+1 only Terms Used in this Manual Installing the Phone Do the following steps Install the Rechargeable Battery Pack into the Handset Installing the Phone Mount the Main Base on a Wall Standard wall plate mounting Installing the Beltclip Direct wall mountingTo attach the beltclip To remove the beltclip Headset Installation Register Handsets When to Re-register Handsets XS1215+1 only Activating Caller ID on Call Waiting Basic SetupActivating AutoTalk Setting Name Tag POP ID Name Tag Setting Insert Selecting the Ring Tone and Volume Using Your Phone Making and Receiving CallsMaking a call Receiving a call Transferring a Call XS1215+1 only Redialing the Last Dialed NumberTo transfer a call To receive a transfer call Traveling Out-of-Range Adjusting the Earpiece VolumeTemporarily Mute Ringer Find Handsets Using Call WaitingSelecting a Different Channel Storing the RocketDial Voice Mail Waiting IndicatorRocketDial Using the Speed Dial Memory Storing Names and Numbers in Speed Dial Memory Using the Speed Dial Memory Page Storing Caller ID Messages in Speed Memory Locations Vol/ or /vol Making Calls from Speed Dial Memory Easy Dial New Zealand only Caller ID and Cidcw Caller ID on Call Waiting Caller ID & Cidcw Viewing the Caller ID Message List Deleting all Caller ID names/numbers Deleting Information from the Caller ID ListDeleting a Caller ID message Making a Call from the Caller ID List Caller ID on Call Waiting Cidcw For XS1215+1 Changing the Digital Security CodeFor XS1215 Low battery alert Battery replacement and handling Power Failure Power Sources Cleaning the battery charging contacts Operating temperature General Information Troubleshooting Troubleshooting Appliances To the caller, transfer the call Liquid Damage Wipe off the liquid, and use as normal Index X ,Y,Z Memory List One Year Limited Warranty Warranty Thank YOU for Buying a Uniden Product