Omron NT31 NT31C manual Programming Console Function, Usable Systems

Programming Console Function Section 6-12

•If data does not reach the printer within 60 seconds after sending starts, the message ‘Finished Printer output failed’ is displayed.

After confirming the result of the check, press Quit. The NT31/NT31C returns to the I/F CHECK MENU screen.

6-12 Programming Console Function

The NT31/NT31C features has been equipped with the Programming Console function, which allows it to be used like a C200H-PRO27-E Programming Con- sole for CPM1, CPM2A, CPM2C, CQM1, CQM1H, C200HX/HG/HE (-Z)E, CS1-series CS1G/CS1H, or SRM1 PCs.

Except for recording (saving) ladder programs on cassette tape and replaying (reading) them, almost all the functions of a Programming Console can be executed.

Note When the programmable controller functions are used, carefully check that the system is safe before carrying out the following operations.

•Changing monitor data

•Switching the operating mode

•Forced set or reset

•Changing a present value or set value

6-12-1 Usable Systems

The Programming Console function can communicate with the PC with the com- munication methods indicated in the following table.

221