Omron NT31 NT31C manual 178

System Settings Section 6-9

Set the screen saver start-up time by following the menu operation from the Sys- tem Menu shown below.

Ver 3.10

Select Maintenance Mode.

Select Memory Switch.

Press [↓] (next screen) or [↑] (previous screen) to display the second memory switch setting screen.

Set a time in the input field to the right of

Screen Saver Start up Time.

Each of the digits can be incremented or decremented by pressing the associated + and − keys.

To set other memory switches, select the relevant screen using the [] (next screen) or [] (previous screen) touch switch, then make the setting.

•To confirm the settings and quit the memory switch setting screen, press the Quit touch switch. The settings made last will be set and the NT31/NT31C will return to the MAINTENANCE MODE MENU screen.

•To quit the memory switch setting screen without confirming the settings, press the Abort touch switch. The NT31/NT31C will return to the MAINTENANCE MODE MENU screen with the previous settings still in effect.

178