Omron NT31 NT31C manual Connecting and Setting Up the Programmable Terminal

TABLE OF CONTENTS

Related Manuals:

Related manuals are listed below.

The j symbol at the end of the catalog number is the revision number.

Connecting and Setting Up the Programmable Terminal

SNT31 and NT31C PT Setup Manual (V062-E1-j, this manual)

This manual describes connecting the Programmable Terminals to a host and peripheral devices and settings required for communications and applications.

The functions and actual operating methods for the NT31 and NT31C PTs are provided in the Reference Manual (V064-E1-j).

Programmable Terminal Functions and Operation

SNT31/31C/631/631C PT Reference Manual (V064-E1-j)

This manual is used for any of the following PTs: NT31, NT31C, NT631, and NT631C. It describes screen configurations, part functions, host control meth- ods, and other application information.

PT connection and setup procedures are described in the NT31 and NT31C PT

Setup Manual (V062-E1-j).

Creating and Transferring Screen Data, and Installing the System Program

SNT-series Support Tool for Windows Ver. 4.1 Operation Manual (V061-E1-j)

The screens displayed on the NT31 and NT31C PTs are created with the Support Tool and transferred to the PT. This manual describes how to create and transfer screen data. It also describes how to download a system program to a PT using the System Installer.

The NT-series Support Tool for Windows is normally referred to as merely the

Support Tool.

Connecting to Controllers Not Made by OMRON

SPC Connection Manual (V042-E1-j)

The NT31 and NT31C PTs can be connected to controllers in the following se- ries: Mitsubishi A Series and FX Series. This manual describes the connection and setup methods for these controllers.

The NT-series Support Tool for Windows Version 4.1 is required to connect the

NT31 and NT31C PTs to these controllers.

SNT31/NT631 Multi Vendor Connection Manual (V060-E1-j)

The NT31 and NT31C PTs can be connected to controllers in the following se- ries: Allen-Bradley SLC 500 Series, GE Fanuc 90-20 and 90-30 Series, and Sie- mens S7-300 and S7-400 Series. This manual describes the connection and set- up methods for these controllers.

x