Omron NT31 NT31C manual 224

Programming Console Function Section 6-12

6-12-3 Method of Use

The Programming Console screen is displayed by operating the system menu as described below.

Ver 3.10

Select Expansion Mode.

Select Programming Console.

The Programming Console screen is dis- played.

Press the Programming Console sheet keys (touch switches) for the operation.

Press the Quit touch switch to exit the screen.

An error is displayed if a wrong communica- tion protocol is selected or a Programming

Console is connected to the peripheral port.(*1)

*1: With the CS1G/CS1H, the Programming Console function can be used simultaneously at both the built-in RS-232C port and peripheral port.

Reference: When an error screen is displayed, the system menu can be displayed by press- ing two of the four corners of the touch panel simultaneously. The Check touch switch on the screen can also be used to display the system menu, but it will not work unless the cause of the error has been removed. If the system menu is not displayed when the Check touch switch is pressed, press two of the four corners of the touch panel to return to the system menu.

224