Omron NT31 NT31C manual Menu Item Function, CPM1, CPM2A, CPM2C, CQM1, CQM1H, C200HX/HG

Operation Modes and the System Menu Section 6-3

Items in the System Menu

Functions of the System Installer Mode

The items displayed in the system menu and their functions are as follows.

Menu Item	Function
Quit	Clear the System Menu screen and return to the RUN mode
	screen.
Transmit Mode	Display the Transmit Mode screen to allow transmission for
	screen data between the Support Tool and the NT31/NT31C.
	For details on transmission of screen data, refer to 6-6 Trans-
	mitting the Screen Data (page 155).
Maintenance Mode	Display the Maintenance Mode menu to allow system mainte-
	nance of the NT31/NT31C, and various NT31/NT31C settings.
Expansion Mode	Display the Expansion Mode menu to allow selection of the
	expansion functions supported by the NT31/NT31C. The fol-
	lowing expansion functions are supported:
	• Version Display
	Displays the version of system program, the date it was
	created, and the PT model. For details, refer to 6-14 Version
	Display.
	• Programming Console Function
	Allows the NT31/NT31C to be used as a Programming Console
	for a CS1G/CS1H, CPM1, CPM2A, CPM2C, CQM1, CQM1H,
	C200HX/HG/HE(-Z), or SRM1.
	For details, refer to 6-12 Programming Console Function.
	• Device Monitor Function
	Allows the NT31/NT31C to change the PC’s operating mode
	and display/change the contents of words in a CS1G/CS1H,
	CPM1, CPM2A, CPM2C, CQM1, CQM1H, C200HX/HG/
	HE(-Z), or SRM1. For details, refer to 6-13 Device Monitor
	Function in this manual or 2-16 Device Monitor Function in the
	Reference Manual.

The following functions can be executed in the System Installer mode.

•Setting the display language

•Clearing and installing system programs

•Disabling/enabling display of the System Menu.

•Disabling/enabling writing to the screen data memory

•Clearing screen data

For details on these functions, refer to 6-5 Operations in the System Installer Mode (page 150).

136