Omron NT31 NT31C manual Setting the Host Link Method

Setting Conditions for Communications with Host by Using Memory Switches Section 6-7

6-7-2 Setting the Host Link Method

Set the communication conditions for the host link method at serial port A or seri- al port B by following the operation from the System Menu shown below.

Ver 3.10

Select Maintenance Mode.

Select Memory Switch.

Display the fourth memory switch screen by pressing the [↓] (next screen) or [↑] (pre- vious screen) touch switch.

Press the touch switch corresponding to the port at which the host link method is to be set (Comm. A Method or Comm. B Method) to display the setting option Host Link.

The setting option changes each time the touch switch is pressed.

160