After choosing which adapter to use to ping the remote system, and setting its
parameters, you must provide the addresses needed to communicate with the remote
system.
Ping Test
1. Client IP Address [129.132.4.20]
2. Server IP Address [129.132.4.10]
3. Gateway IP Address [129.132.4.30]
4. Subnet Mask [255.255.255.0]
5. Execute Ping Test
--------------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen X = eXit System Management Services
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
If changes to the adapter parameters must be made on this screen, entering those
changes will not automatically update the adapter parameters screen. You must go
back to the adapter parameters menu to make changes.
Notes:
1. Once the ping test is initiated, it may take up to 60 seconds to return a result.
2. If the ping test passes or fails, the firmware will stop and wait for a key to be
pressed before continuing.
Change SCSI Settings
This option allows you to view and change the addresses of the SCSI controllers
attached to your system.
SCSI Utilities
1. Hardware Spin Up Delay
2. Change SCSI Id
--------------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen X = eXit System Management Services
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
82 pSeries 630 Model 6C4 and Model 6E4 User’s Guide