When a device type is selected, such as item 1, a Select Task menu will be displayed. The following is an example of that menu for a hard disk.

Select Task

SCSI 18200 MB Harddisk (loc=U0.1-P2/Z1-A8,0)

1.Information

2.Set Boot Sequence: Configure as 1st Boot Device

--------------------------------------------------------------------------------------------------

Navigation keys:

M =

return to main menu

 

ESC

key = return to previous screen

X = eXit System Management Services

--------------------------------------------------------------------------------------------------

Type the number of the menu item and press Enter or Select a Navigation key: _

Selecting Information will display a menu similar to the following for a hard disk.

Device Information /pci@3fffdf0a000/pci@2,4/scsi@1/sd@8,0

 

: (Integrated)

(Bootable)

DEVICE

: SCSI 18200 MB Harddisk ( loc=U0.1-P2/Z1-A8,0)

NAME

: sd

 

DEVICE-TYPE

: block

 

--------------------------------------------------------------------------------------------------

Navigation keys:

 

M =

return to main menu

 

ESC

key = return to previous screen

X = eXit System Management Services

--------------------------------------------------------------------------------------------------

Type the number of the menu item and press Enter or Select a Navigation key: _

The Set Boot Sequence option allows you to set the location of the device in the boot list.

Chapter 4. Using System Management Services 87

Page 105
Image 105
IBM 6.00E+04, 6C4 manual Device, Name DEVICE-TYPE