Customizing the Modem Configuration Files
You can create your own modem configuration files or modify the samples provided. After you customize your modem configuration files, you must access them through the Configure Remote Maintenance Policy Service Aid rather than from the service processor menus.
Note: If you have already set up your serial ports, line speeds, authorizations, and telephone numbers from the service processor menus, use the service aid to specify your customized modem configuration files.
If you have not already set up your serial ports, line speeds, authorizations, and telephone numbers from the service processor menus, use the service aids to set them while you specify your customized modem configuration files.
To disable
1.Find the necessary command in your modem manual.
2.Copy the /usr/share/modems/modem_f.cfg file to a new file with a different name (for example, modem_fx.cfg).
3.In the new file (modem_fx.cfg), change the line Send "ATE0T\r" to Send "ATcccE0T\r" where ccc is the added command as specified in your modem manual, as follows:
Change the third line of each of the following stanzas:
vcondout
vcondin
vripo
4.Save the changes.