![](/images/new-backgrounds/1170111/170111417x1.webp)
Modem Configuration Sample Files
Sample File modem_m0.cfg
#
#COMPONENT_NAME: (ESPSETUP) ENTRY SERVICE PROCESSOR SETUP: modem_m0
#FUNCTIONS: Modem configuration file specifically for IBM
#modem with
#for Catcher calls. This example uses the AT&F reset command to
#choose the factory defaults.
#
#(C) COPYRIGHT International Business Machines Corp. 1996
#All Rights Reserved
#Licensed Materials - Property of IBM
#
#US Government Users Restricted Rights - Use, duplication or
#disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
#The modem has configuration switches. They should be set to the
#factory default settings, except switches 11 and 12. These must be
#to UP ("AT" responses) and DOWN (Asynchronous operation), respectively.
ICDelay 1 DefaultTO 10 CallDelay 120
#
# %N
#
#
# PROGRAMMING NOTE: No blanks between double quote marks (").
condout: | send "AT&F&E2E0T\r" | # Reset to factory defaults |
|
| # Reliable mode |
|
| # Echo off |
| ignore "0\r" or "OK\r\n" timeout 2 | # Ignore modem response. |
| send "AT&E12&E14\r" | # Disable pacing |
|
| # Disable data compression |
| expect "0\r" or "OK\r\n" timeout 2 | # Confirm commands successful. |
| send "AT&SF1&S0S9=1\r" | # DSR independent of CD |
|
| # Force DSR on. |
|
| # CD respond time=100ms |
| expect "0\r" or "OK\r\n" timeout 2 | # Confirm commands successful. |
| send "ATV0S0=0\r" | # Numeric response code |
|
| # |
| expect "0\r" or "OK\r\n" timeout 2 | # Confirm commands successful. |
| done |
|
connect: | send "ATDT%N\r" | # Tone dialing command. |
|
| # %N from Call Home setup. |
|
| # Expect a connection response. |
| expect "33\r" or "31\r" or "28\r" or "26\r" or "24\r" or "21\r" or | |
"19\r" or "13\r" or "12\r" or "1\r" busy "7\r" |
| |
| timeout 60 |
|
| done |
|
retry: | send "A/" | # Repeat the previous command. |
|
| # Expect a connection response. |
| expect "33\r" or "31\r" or "28\r" or "26\r" or "24\r" or "21\r" or | |
"19\r" or "13\r" or "12\r" or "1\r" busy "7\r" |
| |
| timeout 60 |
|
| done |
|
disconnect: | delay 2 | # Separate from previous data. |
|
Appendix F. Modem Configurations 191