IBM 6.00E+04, 6C4 manual Ring Indicate Power-On Menu, Ring Indicate POWER-ON Menu

vRing Indicate Power-On Menu

RING INDICATE POWER-ON MENU

1.Ring indicate power-on : Currently Enabled

2.Number of rings: Currently 3

30.Refresh Modem Settings

98.Return to Previous Menu

Ring indicate power-on is enabled by default on both serial port 1 (S1) and serial port 2 (S2). When ring indicate power-on is enabled, call-in is disabled.

If ring indicate power-on is enabled and call-in is already enabled, you will be asked to confirm your choice. Refer to the message displayed on your screen.

If the ring indicate power-on setting is changed, you must select option 30, Refresh Modem Settings to update the modem settings. If Refresh Modem Settings is selected, and the modem(s) have not been configured, you will be asked to configure the modems first. See ªCall-In/Call-Out Setup Menuº on page 52 for information on configuring modems.

Option 2 is used to set the number of rings.

Chapter 3. Using the Service Processor 41