4-4. Replacing Gun Contact Tip
2
1
Tools Needed:
4-5. Changing Drive Roll and Wire Inlet Guide
5
3
2
1
4
Tools Needed:
5/64 in 7/16 in
YTurn Off power.
1Nozzle
2Contact Tip
Cut off welding wire at contact tip. Remove nozzle.
Remove contact tip and install new contact tip. Reinstall nozzle.
Ref. 800
1Securing Screw
2Inlet Wire Guide
Loosen screw. Slide tip as close to drive rolls as possible without touching. Tighten screw.
3
Install guide as shown.
4 Drive Roll
Install correct drive roll for wire size and type.
5 Drive Roll Securing Nut
Turn nut one click to secure drive roll.
