Setup Remote IPL (Initial Program Load)

This option allows you to enable and set up the remote startup capability of your system unit. You must first specify the network parameters.

Network Parameters

1. IP Parameters

2. Adapter Parameters

3. Ping Test

--------------------------------------------------------------------------------------------------

Navigation keys:

 

 

M = return to main menu

 

ESC key = return

to previous screen

X = eXit System Management Services

--------------------------------------------------------------------------------------------------

Type the number of the menu item and press Enter or Select a Navigation key: _

Selecting the IP (Internet Protocol) Parameters option displays the following menu.

IP Parameters

 

1.

Client IP Address

[000.000.000.000]

2.

Server IP Address

[000.000.000.000]

3.

Gateway IP Address

[000.000.000.000]

4.

Subnet Mask

[255.255.255.000]

--------------------------------------------------------------------------------------------------

Navigation keys:

 

 

M = return to main menu

 

ESC key = return

to previous screen

X = eXit System Management Services

--------------------------------------------------------------------------------------------------

Type the number of the menu item and press Enter or Select a Navigation key: _

To change IP parameters, type the number of the parameters for which you want to change the value.

Attention: If the client system and the server are on the same subnet, set the gateway IP address to [0.0.0.0].

78pSeries 630 Model 6C4 and Model 6E4 User's Guide

Page 96
Image 96
IBM 6C4, 6.00E+04 manual Setup Remote IPL Initial Program Load