Sample File modem_m1.cfg
#
#COMPONENT_NAME: (ESPSETUP) ENTRY SERVICE PROCESSOR SETUP modem_m1
#FUNCTIONS: Modem configuration file specifically for IBM
#
#This example uses the AT&F reset command to choose the factory defaults.
#
#To allow dial commands for digital pagers, it is necessary to reduce
#the number of characters in the dial command. Each comma (delay) has
#been set to 6 seconds (S8=6) for that reason.
#
#
#(C) COPYRIGHT International Business Machines Corp. 1996
#All Rights Reserved
#Licensed Materials - Property of IBM
#
#US Government Users Restricted Rights - Use, duplication or
#disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
ICDelay 1 DefaultTO 10 CallDelay 120
#
# %N
#
#
# PROGRAMMING NOTE: No blanks between double quote marks (").
condout: | send "AT&F*E0E0\r" | # Reset to factory defaults. |
|
| # *E0=data compression disabled |
|
| # E0=echo disabled |
| ignore "0\r" or "OK\r\n" timeout 2 | # Ignore modem response. |
| send "AT#F0*Q2S8=6\r" | # Trellis modulation disabled |
|
| # Retrain with adaptive rate |
|
| # Set ,=6second |
| expect "0\r" or "OK\r\n" timeout 2 | # Confirm commands successful |
| send "ATV0X0S0=0\r" | # Numeric response code |
|
| # AT compatible messages |
|
| # |
| expect "0\r" or "OK\r\n" timeout 2 | # Confirm commands successful. |
| done |
|
connect: | send "ATDT%N\r" | # Tone dialing command. |
|
| # %N from Call Home setup. |
| expect "1\r" busy "7\r" timeout 60 | # Expect a connection response. |
| done |
|
retry: | send "A/" | # Repeat the previous command. |
| expect "1\r" busy "7\r" timeout 60 | # Expect a connection response. |
| done |
|
disconnect: | delay 2 | # Separate from previous data. |
| ||
| send "+++" | # Assure command mode. |
| delay 2 | # Allow mode switching delay. |
| send "ATH0\r" | # Set modem |
|
| # (i.e., hang up). |
| ignore "0\r" or "OK\r" timeout 2 | # Ignore modem response. |
| send "ATE0Q1\r" | # Initialize modem: Echo OFF, |
| ignore "0\r" timeout 1 | # Disable responses. |
|
| |
| done |
|
condin: | send "AT&F*E0E0\r" | # Reset to factory defaults. |
Appendix F. Modem Configurations 193